kevlar dual leg lanyard
Hook Connector Types - Snap Hook - Ladder Hook - Scaffold Hook
Load image into Gallery viewer, kevlar dual leg lanyard
Load image into Gallery viewer, Hook Connector Types - Snap Hook - Ladder Hook - Scaffold Hook



Safety Direct's HOT WORK energy-absorbing lanyards, also known as shock-absorbing lanyards, are fire resistant and are used for welding, grinding sparks, abrasive surfaces, and high heat conditions. The snap hook nearest to the energy absorber attaches to the dorsal (back) D-ring of the harness and the other connects to the anchor point.


  • 310 polyester energy absorber or 310 Kevlar® energy absorber

  • Twin leg for 100% tie-off

  • 100% Kevlar® webbing

  • Clear heat shrink tubing protects the label and enables inspection of the energy absorber

  • Available with snap, ladder or scaffold hook connectors

  • Available in fixed or adjustable 3ft, 4ft, 5ft and 6ft lengths

  • Add ID/Name inside shrink tube

  • Specialty Arc Flash versions available


  • 1 3/4 inch (45 mm) woven Kevlar® webbing with (Minimum tensile strength of 5000 lbs. 23 kN)

  • Snap, ladder and scaffold hook minimum break load 5000 lbs. (23 kN) and gate rating of 3600 lbs. (16 kN)

  • Maximum deployment length is 11.3 ft. (3.5 m)

  • Maximum free fall distance CANNOT exceed 6 ft. (1.8 m)

  • Maximum capacity including clothing and equipment must be at least 110 Lbs. (50 kg) and not exceed 310 Lbs. (140 kg)

  • Certified to CSA Z259.11-17